How to Install Microchip Cat Flap?

How to Install Microchip Cat Flap

​The process of installing a microchip cat flap on a wooden or uPVC wall is pretty straightforward provided that you can access the required tools and follow simple DIY instructions. Installation on a glass door is a bit complex and may require specialized tools and professional help. For this reason, this guide is only for microchip cat flap installations involving wooden and uPVC walls. If you still need to buy one, you can find the best microchip catflap here.

Here are the tools that you would need to carry out the process:

  • ​A pen or pencil
  • ​A jigsaw
  • ​Tape measure and
  • ​Drill

Step One

The first step involves determining the position where you will install the microchip cat flap. When doing this, remember that the best position should correspond with the height of the cat’s legs.

For instance, if you find that the cat’s legs are 120mm off the ground, then the microchip cat flap should be 120mm from the door’s bottom. In the case of multiple cats, you should consider the height of your shortest cat.

This is because it is much easier for the taller cats to crouch and pass through a short cat flap.

microchip cat flap

Step Two

​Secondly, mark the template of the cat flap onto the door. To do this, you need to first of all locate the door’s center point by measuring its width and then finding the halfway point. This is the point where the template of the cat flap should be positioned. At least every cat flap comes with a template to enable you to go through the installation process with precision. While marking the template, make sure to keep in mind the height of your shortest cat.

Step Three

​The third step is to drill the corners of the template. Be sure to use a drill bit larger than the jigsaw blade since it will have to fit through the holes to cut out the template.

Step Four

cut out the template for cat flap

Use the jigsaw to cut out the template.

Once you have drilled all the four holes using the cat flap template as your guide.

Insert the jigsaw into one of the holes and cut through carefully around the template.

Make sure you cut around so that you can easily out the cut piece. 

Step Five

The next step is to drill the holes to fix the cat flap to. The best thing about using the template is it guides you to where you are supposed to drill extra holes for inserting the bolts to secure the cat flap in place.

This is why you need to buy a microchip cat flap that comes with a template for drilling the holes and making the cut. Microchip cat flaps that don’t come with the template will give you a difficult time doing the installation. 

Step Six

​The final step is to bolt the cat flap in position. Being the final step in the installation process, this should be the simplest step. It is as simple as screwing down cat flap in place through the holes drilled in the previous step.

​As you can see, the process of installing a microchip cat flap is a very simple one and it should not take you a lot of time and effort. However, it is worth noting that the process is only simple if you are installing on uPVC or wooden walls. For glass and concrete walls, this may take a lot more effort and expertise that cannot be achieved with DIY skills. Hiring a professional in such a case would be the best thing to do. Once you have done the installation, now familiarize the cat to make sure it does not find it hard to use it.

Related Reviews You Might Like

Top 10 Best Dining Table Set In September 2020

Top 10 Best Kitchen Sideboard In September 2020

Top 10 Best Kitchen Furniture In September 2020

Top 10 Best Kitchen Units In September 2020

Sandra Rosenberg

Sandra Rosenberg

Kitchen and food junkie. I love everything to do with cooking and making my kitchen the best place in the house. If you have any questions, do let me know, I'm sure I can help if it's food-related :)

Click Here to Leave a Comment Below

Leave a Comment: